I made some rudder hold up bars. Made from 304 stainless steel (except pull pin). 5/8" round handle lightly knurled for good grip.
Selling for $45/ea. Picture attached.
Rudder Hold Up Bar (ALL SOLD)
Moderators: Tim Bosma, Tom Elsen
Rudder Hold Up Bar (ALL SOLD)
Last edited by Stef on Fri Apr 07, 2023 7:27 am, edited 2 times in total.
Stef
Odyssey #146
Odyssey #146
Re: Rudder Hold Up Bar
I don't think your pic got attached.
Later
C
Later
C
Re: Rudder Hold Up Bar
I’ll take one, let me know where to send the check.
-
SailingUphill
- Posts: 184
- Joined: Fri Aug 17, 2012 1:52 pm
Re: Rudder Hold Up Bar
Stef I might be reaching out to you.
I like how you built your mast carrier.
Also depending on the shape of 299, I might need parts
I know YOU da man for that stuff.
I like how you built your mast carrier.
Also depending on the shape of 299, I might need parts
I know YOU da man for that stuff.
Presently hull 399, "Ragtime" Blackwater Yacht Racing, Smith Mountain Lake, VA
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.
Re: Rudder Hold Up Bar
FYI. Fontana sold 264, staying on the lake, but the guy is new to sailing a larger boat. He didn't pull it until after Thanksgiving.
Ackley sold his 7.9 and it is also staying on the lake. These guys rented that J24 at Lighthouse, Sayonara, which was "given" away. Enoksen said they just wanted it gone.
Does anyone know how to post a photo on this forum? I tried to upload a picture, but a get a small yellow triangle under status. If I click it it says "ERROR Sorry, the board attachment quota has been reached."
Ackley sold his 7.9 and it is also staying on the lake. These guys rented that J24 at Lighthouse, Sayonara, which was "given" away. Enoksen said they just wanted it gone.
Does anyone know how to post a photo on this forum? I tried to upload a picture, but a get a small yellow triangle under status. If I click it it says "ERROR Sorry, the board attachment quota has been reached."
Stef
Odyssey #146
Odyssey #146
-
SailingUphill
- Posts: 184
- Joined: Fri Aug 17, 2012 1:52 pm
Re: Rudder Hold Up Bar
Posting pictures is kind of broken across most forums. A couple years ago photobucket decided they weren't going to do "free" anymore.
So sites like this, got full quick as there was no free option to upload pictures.
I personally was spending $250 a year just to get a spot to dump picture files on my own site. I may just go back to that, because for the longest time I had the highest resolution pictures of Capri 25, S2 7.9, and Capri 22 pictures you could find online (for free).
I leave for my moron trip tomorrow to MN.
If you think of it Stef send me a picture of the hold-up bar, I will slam it onto my FTP site and link in this thread.
Email me your address too and I'll send you $45 for one of the hold-up bars.
So sites like this, got full quick as there was no free option to upload pictures.
I personally was spending $250 a year just to get a spot to dump picture files on my own site. I may just go back to that, because for the longest time I had the highest resolution pictures of Capri 25, S2 7.9, and Capri 22 pictures you could find online (for free).
I leave for my moron trip tomorrow to MN.
If you think of it Stef send me a picture of the hold-up bar, I will slam it onto my FTP site and link in this thread.
Email me your address too and I'll send you $45 for one of the hold-up bars.
Presently hull 399, "Ragtime" Blackwater Yacht Racing, Smith Mountain Lake, VA
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.
Fomerly hull 68,"Rum Line," Paupack Sail Club, Lake Wallenpaupack, PA.
Re: Rudder Hold Up Bar
I would be interested in a rudder hold up bar. Can you text a photo? Thanks, Jay 843-607-766&