Spinnaker pole mast ring

Please post any questions or comments regarding the class association rules, here.

Moderators: sderby, Tim Bosma, Tom Elsen

Post Reply
Stef
Posts: 319
Joined: Thu Jan 15, 2004 9:40 pm
Location: NE Pennsylvania

Spinnaker pole mast ring

Post by Stef » Sun Apr 17, 2011 4:11 pm

Does anyone know the spinnaker pole ring location on the mast? Inches for the bottom? I have checked the class rules and cannot find anything.
Thanks
Stef
Odyssey #146

User avatar
Tim Bosma
Web Lackey
Posts: 530
Joined: Tue Jan 14, 2003 4:56 pm
Location: West Michigan
Contact:

Re: Spinnaker pole mast ring

Post by Tim Bosma » Mon Apr 18, 2011 5:19 pm

Stef,
our sticks are hanging in the the barn, I'll try to remember to measure that this week.
Tim Bosma, Bosun
Hot Tamale Racing
boz@htr477.com
S2 7.9's : #477

fleck
Minister of propaganda and lies
Posts: 180
Joined: Thu Jan 16, 2003 11:58 am
Location: Deltaville, VA

Re: Spinnaker pole mast ring

Post by fleck » Tue Apr 19, 2011 3:55 pm

A2.C.12. The spinnaker pole is to be attached at the single fixed ring on the mast. Use of a second ring or sliding track is
not allowed. If a sliding track has been installed, the original position (four feet one inch above the end of the mast
extrusion) must be marked with arrows on both sides of the mast and the ring shall not be moved from this
position while racing.
Bob Fleck
Horizon 484

Post Reply